Heavy Duty Trimfast Finish Pins for attaching fiber cement and/or wood trim to concrete masonry units or cold formed steel framing steel framing 14 ga. and lighter. For use in ET&F Models 210 and 210T

ET&F Fastening Systems brand

AKN-144-0175W .144 X 1-3/4" Knurled Shank Wire Collated Pins, for concrete application. Used in Bostitch N89C Coil Nailer

Packed 200 pins/coil, 12 coils/case. Sold by the case. ET&F Brand

ET&F Model 210 Heavy Duty Trimfast System for steel framing. Uses pins from 1/2" to 2-1/2" (Model 210. LIMITED AVALIABIITY. BEING REPLACED BY MODEL 210TA) or 1-1/2" to 3" (Model 210TA).

Features an easy-load magazine, adjustable drive control and comes standard with a durable plastic carrying case. Consistently countersinks the fasteners even when used with James Hardie XLD® 5/4 trim. Operates at 115 psi.

ET&F brand

ET&F Model 500MA Stuccofast Pneumatic coil tool with magnetic or friction washer holder. Sequential fire operation and adjustable overdrive control to enable a perfect fastening with each pull of the trigger. Operates at a maximum of 120 psi.

ET&F Fastening Systems brand

( Previous model 500M )

ET&F Model 610 Rockfast Pneumatic Tool for steel framing 12 ga. and lighter.

NOT YET AVAIL.  WILL REPLACE MODEL E45

ET&F Fastening Systems brand

Model E45 15 degree coil nailer for face nailing siding, steel-to-steel and gypsum wall board fastening system. Uses 1" to 2-1/2" long pins. For face nailing fiber cement siding, use AKN-100-XXXXHA pins. For fastening interior wall board, use ADW-100 pins. For select steel-to-steel applications of up to two layers of 54 mil (16 GA.) with rigid bracing use ASK-100-XXXXH pins. Magazine capacity: 250 pins, Tool weight: 6 lbs. DISCONTINUED, WILL BE REPLACED BY MODEL 610.

ET&F Brand

Rockfast System Steel Framing Pins (for use in ET&F Model E45) for face nailing plywood, oriented strand board (OSB) and fiber cement siding (Hardie Siding) to cold formed steel from 12 ga. to 22 ga. Finished with Aericote® 1000 coating which provides ten times the corrosion protection of electroplated zinc. Includes ADW pins (cup head) for drywall instillation and ASK pins for steel to steel. When driven, the fastener separates completely from the sheet plastic collation leaving a clean fastening, especially important when face nailing siding. The 1" long pins can be used for select steel-to-steel applications of up to two layers of 16 ga.

ET&F Fastening Systems brand

Stuccofast Knurled Framing Pins with EF-90 Washers (for use in ET&F Model 500M) for attaching stucco lath and insulation to cold formed steel framing.

EF-90 flat washer is meant for use with hard material like gypsum board.

ET&F Fastening Systems brand

0.144" Smooth Shank Collated Pins (for use in Aerico 90) used to fasten to concrete or masonry substrates. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls. Come in both plastic (P) and tape (C) collated varieties. Hardwood flooring installers use the tape collated pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. The tape collation eliminates flagging of plastic strip under pin head.

ET&F Fastening Systems brand

*SPECIAL ORDER BY REQUEST: NON-STANDARD LENGTHS, REQUIRES 8-10 WEEK LEAD TIME*

0.144" Smooth Shank Plastic Collated Pins (for use in Aerico 90) used to fasten to concrete or masonry substrates. Hardwood flooring installers use these pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls.

ET&F Fastening Systems brand