ATXP-10 Acrylic Adhesive, 9.40 oz Tubes

Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.

**PLEASE CALL FOR LATEST PRICING AND AVAILABILITY**

Key Features:

Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads

Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960

Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966

AT-XP is code listed for installation with the Speed Clean™ DXS system without any further cleaning (AT-XP: IAPMO-UES ER-263)

10:1 two-component high-strength, acrylic-based anchoring adhesive

Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry

Easy hole-cleaning procedure — no power-brushing required

Suitable for use in dry or water-saturated concrete

For best results, store between 14°F (–10°C) and 80°F (27°C)

Cures in substrate temperatures as low as 14°F (–10°C) in 24 hours or less

Available in 9.4 oz., 12.5 oz. and 30 oz. cartridges for application versatility

Volatile Organic Compound (VOC) – 30 g/L

Manufactured in the USA using global materials

Simpson Strong-Tie Brand, Packed 6 9.4 oz tubes, 6 tubes/case, sold by the case for $107.70, $17.95/tube