ET&F STEEL FRAMING AND CONCRETE

Applied Filters: Category Name: ET&F STEEL FRAMING AND CONCRETE
Trimfast Finish Pins for steel framing 14 ga. and lighter (for ET&F Model 110A)
$287.50 - $389.00
* This product contains multiple skus. Please view product details to add to cart.

Trimfast Finish Pins for attaching popular trim materials to steel framing 14 ga. and lighter. For use in ET&F Model 110A Trimfast Nailer.

ET&F brand.

Heavy Duty Trimfast Finish Pins for steel framing 14 ga. and lighter. (for ET&F 210 and 210T)
$429.00 - $1,340.00
* This product contains multiple skus. Please view product details to add to cart.

Heavy Duty Trimfast Finish Pins for attaching fiber cement and/or wood trim to concrete masonry units or cold formed steel framing steel framing 14 ga. and lighter. For use in ET&F Models 210 and 210T

ET&F Fastening Systems brand

Panelfast Steel Framing Pins (for use in ET&F Model 510)
$199.00 - $317.00
* This product contains multiple skus. Please view product details to add to cart.

Panelfast Steel Framing Pins (for use in ET&F Model 510) for attaching plywood, oriented strand board (OBS), exterior gypsum sheathing and fiber cement boards to steel framing 14 ga. and lighter.

Uses a ballistic point and knurled shank combine to produce maximum holding strength, and have Aericote® 1000 coating, which provides 1000 hour salt spray corrosion protection.

ET&F Fastening Systems brand

Rockfast System Steel Framing Pins (for use in ET&F Model 610)
$118.00 - $1,695.00
* This product contains multiple skus. Please view product details to add to cart.

Rockfast System Steel Framing Pins (for use in ET&F Model 610) for attaching plywood, oriented strand board (OSB) and fiber cement siding to cold formed steel from 12 ga. to 22 ga. Finished with Aericote® 1000 coating which provides ten times the corrosion protection of electroplated zinc. When driven, the fastener separates completely from the sheet plastic collation leaving a clean fastening, especially important when face nailing siding. The 1" long pins can be used for select steel-to-steel applications of up to two layers of 16 ga.

ET&F Fastening Systems brand

Steel Framing Pins (for use in ET&F Model 500)
$209.00 - $319.00
* This product contains multiple skus. Please view product details to add to cart.

ET&F Steel Framing Pins (for use in ET&F Model 500) used to attach plywood and oriented strand board (OSB) to light gauge steel from 14 ga. to 22 ga.

These pins are finished with Aericote® 1000 coating which provides ten times the corrosion protection of electroplated zinc. Unlike wire collation, the plastic coil collation eliminates finish burn-through which initiates corrosion.

ET&F Fastening Systems brand

Stuccofast Knurled Framing Pins and EF-90 Washers (for use in ET&F Model 500M)
$324.00 - $369.00
* This product contains multiple skus. Please view product details to add to cart.

Stuccofast Knurled Framing Pins with EF-90 Washers (for use in ET&F Model 500M) for attaching stucco lath and insulation to cold formed steel framing.

EF-90 flat washer is meant for use with hard material like gypsum board.

ET&F Fastening Systems brand

Stuccofast Knurled Framing Pins with ET-90 Washers (for use in ET&F Model 500M)
$325.00 - $369.00
* This product contains multiple skus. Please view product details to add to cart.

Stuccofast Knurled Framing Pins with ET-90 Washers (for use in ET&F Model 500M) for attaching stucco lath and insulation to cold formed steel framing.

ET-90 washer with tabs is meant for use over soft material such as insulation for added grip.

ET&F Fastening Systems brand

0.144" Smooth Shank Collated Pins (for use in Aerico 90) [Both Plastic and Tape Collated Varieties Available]
$258.00 - $498.00
* This product contains multiple skus. Please view product details to add to cart.

0.144" Smooth Shank Collated Pins (for use in Aerico 90) used to fasten to concrete or masonry substrates. Hardwood flooring installers use these pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls. Come in both plastic and tape collated varieties.

ET&F Fastening Systems brand

0.144" Knurled Shank Collated Pins (for use in Aerico 90) [Both Plastic and Tape Collated Varieties Available]
$319.00 - $579.00
* This product contains multiple skus. Please view product details to add to cart.

0.144" Knurled Shank Collated Pins (for use in Aerico 90) used to fasten to concrete or masonry substrates. Hardwood flooring installers use these pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls. Come in both plastic and tape collated varieties.

ET&F Fastening Systems brand

*SPECIAL ORDER BY REQUEST* 0.144" Smooth Shank Plastic Collated Pins (for use in Aerico 90)
$357.00 - $624.00
* This product contains multiple skus. Please view product details to add to cart.

*SPECIAL ORDER BY REQUEST: NON-STANDARD LENGTHS, REQUIRES 8-10 WEEK LEAD TIME*

0.144" Smooth Shank Plastic Collated Pins (for use in Aerico 90) used to fasten to concrete or masonry substrates. Hardwood flooring installers use these pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls.

ET&F Fastening Systems brand

*SPECIAL ORDER BY REQUEST* 0.144" Knurled Shank Plastic Collated Pins (for use in Aerico 90)
$315.00 - $392.00
* This product contains multiple skus. Please view product details to add to cart.

*SPECIAL ORDER BY REQUEST: NON-STANDARD LENGTHS, REQUIRES 8-10 WEEK LEAD TIME*

0.144" Knurled Shank Plastic Collated Pins (for use in Aerico 90) used to fasten to concrete or masonry substrates. Hardwood flooring installers use these pins to attach plywood, oriented strand board (OSB) underlayment or wood furring strips to concrete. Siding contractors use these pins to attach fiber cement siding to concrete or masonry walls.

ET&F Fastening Systems brand

Contact Us

401-295-2525

info@deltekproducts.com

Deltek Products, Inc.
44D Cross Park Ave.
North Kingstown, RI 02852

eCommerce design & development by Brave River Solutions