ATXP-10 Acrylic Adhesive, 9.40 oz Tubes
Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.
Simpson Strong-Tie Brand, Packed 6 9.4 oz tubes, 6 tubes/case, sold by the case for $107.70, $17.95/tube.
CDT10S Manual Dispensing Tool for 10 oz, Single-Cartridge Adhesives
The CDT10S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.
Simpson Strong Tie Brand
CPFH09KT, Home Anchoring Systems Restoration Solutions Restoration Products
The Crack-Pac Flex-H2O polyurethane injection resin seals leaking cracks, voids or fractures from 1/32" to 1/4" wide in concrete or solid masonry. Designed to perform in applications where water is seeping or mildly leaking from the crack, the polyurethane is packaged in the cartridge and an accelerator is packaged in the nozzle. When the resin encounters water as it is injected into the crack, it becomes an expanding foam that provides a flexible seal in leaking and non-leaking cracks.
Simpson Strong-Tie, packed 2 packs/case. Sold by the case at $240, $120/pack
ETIPAC10KT Crack-Pac Injection Epoxy
The Crack-Pac injection epoxy is designed to repair cracks in concrete ranging from 1/64" to 1/4" wide in concrete walls, floors, slabs, columns and beams. The mixed adhesive has the viscosity of a light oil and a low surface tension, allowing it to penetrate fine to medium-width cracks in dry, damp or wet conditions with excellent results. Resin is contained in the cartridge and hardener is contained in the nozzle.
Simpson Strong-Tie Brand, Packed 2 packs/case. Sold by the case at $240, $120/pack